Location de sonorisation
Caissons de basse
SPECIFICATIONS
112SA
Enclosure:
bass-reflex
Frequency response:
40Hz ÷ 150Hz
Sensitivity (1W, 1m):
99 dB
Max SPL:
124dB
Components:
12" woofer
Electronic stereo x-over:
150Hz, 24dB/oct
Construction:
Multiply / polyurethane paint
Amplifier
MosFet, class A-B / active processor
Max output power:
450 W continuous (4 ohm/0,1% THD)
750 W peak
Connections:
X-over stereo input
balanced XLRs
link' output (parallel)
balanced XLRs
'X-over stereo output
unbalanced XLRs
Dimensions (WxHxD):
46 x 40 x 34,5 cm
Weight:
24 kg
Accessories:
SM4 satellite
supporting pole
Enceintes satellites
SPECIFICATIONS
260 / 260A
Enclosure:
2-way bass-reflex
Frequency response:
50Hz ÷ 20kHz
Sensitivity (1W, 1m):
101,5 dB
Max SPL:
126dB
Components (custom):
bass:
10" woofer
mid-high:
horn (90°x60°)
X-over:
1800 Hz
18dB/oct.
Power handling (passive versions)
250 W
Impedance:
8 Ohm
Construction:
Plywood / polyurethane paint
Amplifier:
MosFet, A-B class processor controlled (in the active versions)
Max. output power:
250 W continuous
400 W peak
Connections:
415, 412, 260 :
Unbalanced XLRs + jacks wired in parallel.
415A, 412A, 260A :
Balanced XLRs in parallel.
110A :
Unbalanced XLRs in parallel.
Dimensions (WxHxD):
33x46x32 cm
Weight:
260: 16 kg
260A: 21 kg
Table de mixage
Maximum Output Power
500 W/4 ohm stereo @0.5% THD at
1Hz (1000W BTL/MONO)
Frequency Response
20Hz~20kHz +1dB, -3dB @1W output
into 8 ohm (SPEAKER OUT); 20Hz~20kHz +1dB, -3dB @+4dB output into 600 ohm
(ST OUT, MONO OUT, EFFECT SEND, MONITOR OUT)
Total Harmonic Distortion
Less than 0.5% @20Hz~20kHz, 100W
output into 4 ohm (SPEAKER OUT); Less than 0.2% @20Hz~20kHz, +14dB output
into 600 ohm (ST OUT, MONO OUT, EFFECT SEND, MONITOR OUT)
Hum and Noise
[Average, Rs=150; with
20Hz~20kHz BPF]; -128dB equivalent input noise, -65dB residual output noise
(SPEAKER OUT); -95dB residual output noise (ST OUT, MONO OUT, EFFECT SEND,
MONITOR OUT)
Crosstalk at 1kHz
70dB adjacent input, 70dB input
to output
Input Channel Equalization
HIGH: 10kHz shelving/MID:2.5Hz
peaking/LOW:100Hz shelving
Limiter
Comp.:THD greather than or equal
to 0.5%
Graphic Equalizer
7 bands (125, 250, 500, 1k, 2k,
4k, 8kHz), + and or - 12 dB Maximum
Internal Digital Effect
16 programs
Foot Switch
DIGITAL EFFECT MUTE: on/off
Phantom Power
+48V is supplied to electrically
balanced inputs
Power Requirements
120V AC 60Hz
Dimensions (W x H x D)
480 x 107 x 442 mm (18-7/8" x
4-3/16" x 17-3/8")
Weight
14kg (30.86 lbs.)
Cliquez ici pour plus de détails
15 selectable frequencies for interference-free operation.
Interchangeable microphone elements for maximum flexibility.
Digital "Four Level Diversity" circuitry and SAW filters for
interference-free reception.
Multichannel capability for simultaneous use of up to 19 channels.
Modular system architecture and interchangeable microphone elements.
Complete with 19" rack mount kit.
4 X C 420 PP
C 420 PP
FREQUENCY RANGE 20 - 20,000 Hz
POLAR PATTERN cardioid
SENSITIVITY 7 mV/Pa
IMPEDANCE 200 Ohm
MAXIMUM SPL FOR 1%
/ 3% THD 126 dB / 130 dB
SIZE approximately 130
mmØ /5.1" Ø
NET WEIGHT C 417 PP: 30g (1.1
oz.)
SHIPPING WEIGHT C 417 PP: 540g
(19.6 oz.)
D
880/D 880 S
TYPE
dynamic microphone
FREQUENCY RANGE
60 - 20,000 Hz
POLAR
PATTERN
supercardioid
SENSITIVITY AT 1000 HZ
2.5 mV/Pa (-52 dBV
re 1 V/Pa)
EQUIVALENT NOISE LEVEL
22 dB(A) to DIN
45412
MAXIMUM
SPL FOR 1% (3%) THD
147 dB SPL (156 dB
SPL)
ELECTRICAL IMPEDANCE
<600 ohms
RECOMMENDED LOAD IMPEDANCE
>2000 ohms
CONNECTOR
3-pin male XLR
FINISH
matte black enamel
SIZE
Length
: 180 mm (7.1 in.)
NET/SHIPPING WEIGHT
295/600
g (10.4 oz./1.3 lb.)
